Color waterproof coating

1. Product introduction:
This product is an environmentally friendly waterproof coating made of polymer acrylic resin as the main film-forming material, supplemented with a variety of additives and inorganic powders, and processed through a special process. When it is applied to the surface of an object, it will solidify as the water evaporates at room temperature, thus forming a solid overall waterproof film on the surface of the object to be waterproof and anti-seepage.
2. Product characteristics:
1. This product is a single-component paint, which is simple and convenient to apply;
2. It does not flow when applied on facades, slopes, and top surfaces.
3. Color can be added to form a colored coating;
4. This product uses water as the dispersion medium, which is non-toxic, harmless and pollution-free;
5. It can be used with cement mortar and other various The base surface of the material is firmly bonded; 6. The coating is tough and strong, with excellent durability and weather resistance.
3. Technical indicators:

4. Scope of application:
             Mainly used for waterproofing of various roofs, basements, bathrooms and various old roof repairs, especially suitable for making waterproof layers on color steel plate houses, polyurethane foam insulation boards and special-shaped structures.
V. Construction requirements:
1. The base layer is required to be smooth and clean, with no sand, no bulges, no gray skin, and no sharp edges;
2. It rains or has no sharp edges during the construction period. When there is dew, wait for it to dry before construction;
3. If the coating thickness does not meet the design requirements, one or more layers can be added;
4. The construction temperature should be above 0℃, low The coating film cannot dry at 0℃.
5. If reinforcement processing is required during construction, it is required to use filament non-woven fabric or white cotton cloth as the reinforcing cloth in the middle of the coating film. This product is not suitable for using glass fiber cloth as reinforcement cloth;
6. No matter what kind of base layer is used for construction, the minimum thickness of the coating film shall not be less than 1.5mm;
6. Construction method:
1 . First, mix the expansion joints with waterproof coating and sand, then pour them evenly. Strengthen the weak areas such as expansion joints, drains, ditches, and yin and yang corners by paving them with cloth and coating them one at a time; 2. No on-site ingredients are required and can be used directly. As long as the coating is stirred evenly, use rolling or brushing. , scraping and other methods can be used for construction;
3. Coating: Use a roller or brush to apply, and complete it layer by layer in the order of base layer→lower layer→reinforcement layer→middle layer→upper layer, with the time interval between each layer The previous layer of coating shall be dry and non-stick.
7. Quality requirements:
After the waterproof layer of the paint is completed, it should be smooth, uniform and consistent in thickness. There should be no leakage, water accumulation, cracks, peeling, bulging, etc., and the thickness should meet the design requirements.
8. Packaging and storage:
This product is 10kg/barrel, should be moisture-proof and sun-proof, and has a shelf life of one year.

</p