Concrete Pump Runtong is looking for nationwide agents

Concrete Pump Runtong (Pump Runtong Pump Runtong Pump Runtong Pump Lubricant Pipe Runner)

Anhui Yulong New Material Technology Co., Ltd. provides free samples. If your company wants to try Pump Runtong, We can provide services. You only need to contact our company by phone, and our company will provide you with 2 bags of Pump Runtong samples for free. If necessary, please call Anhui Yulong New Material Technology Co., Ltd. at 05523111627 13605520657. Concrete pump runtong, this product is used to replace the mortar used to moisten pumps, making pumping construction more energy-saving and economical.
1. Product introduction
Concrete pump Runtong is a polymer material that our company introduces German technology and cooperates with to produce. Pump Runtong can significantly improve concrete pumping capacity, reduce pipeline friction and pipeline resistance, significantly extend the service life of pump pipes, completely replace pump mortar, reduce processes, shorten operating time, and has the characteristics of rust prevention, fast, convenient, environmentally friendly, and economical. Funding and other advantages.
2. Scope of application
Pump lubrication products are suitable for pump lubrication of on-site pump pipes for pumping concrete and various dry mortars. It has good adaptability to various grades of concrete and completely replaces the pump mortar of various pump pipes. Pump Runtong products can avoid pump clogging accidents of concrete pumps and on-site mortar pumps, reduce transportation vehicles, improve equipment utilization, and reduce the use costs of enterprises using ready-mixed concrete and ready-mixed dry mortar. Using Pump Runtong products saves time, effort and worry. It is a brand new pumping construction technology.
3. How to use
Before pumping, first take the required amount of clean dissolved water and pour it into the container (the water temperature in winter should be above five degrees above zero), then slowly add the pump Runtong, while Add and stir until all is dissolved, then let stand for 3-5 minutes, stir again and use. When using a truck pump to pump concrete, slowly pour the prepared Pump Runtong solution into the hopper along the inner wall of the pump truck hopper, and then start to slowly pour concrete into the hopper. After the concrete covers the feed port of the delivery pump, you can Start pumping concrete and ready-mixed mortar under pressure. The method is the same when using ground pumps and mortar pumping equipment.
JH-RB pump lubrication dosage preparation table
Transmission pump tube length Product dosage Dissolved water dosage
Below 50 meters 1 bag 30±2kg
50 meters-100 meters 2 bags 60±5 kg
100-200 meters 3-4 bags 140±10 kg
IV. Key points for product use
1. First ensure the pump pipes and connections of the vehicle pump, ground pump and mortar pump The parts are sealed and there are no leaks;
2. After checking the pump pipe of the pump truck, flush the pump with clean water to ensure that there are no residues, debris and other blockages in the pump pipe;
3. When pumping concrete, the pump Runtong solution should be discharged from the outside of the concrete formwork first, and remember not to pour it into the concrete structure;
4. After the concrete pump and ready-mixed mortar pump are completed, the pump pipes and pump trucks should be flushed with clean water in time;
5. Protective glasses should be worn when using this product. If the product solution is accidentally sprayed into the eyes, rinse immediately with plenty of water.
5. Analysis of economic benefits of using Pump Runtong
Using Pump Runtong products once can save about 230 yuan in pump mortar and transportation vehicle costs. Based on the annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed Based on mortar calculations, if the pump is operated 2,600 times per year, approximately 600,000 yuan can be saved per year. </p