How much impact does pump truck lubricant have on the strength of concrete?

Now more and more commercial concrete plants, mixing stations, and construction sites have begun to use pump truck lubricants. Pump truck lubricant, this product has actually been on the market for more than ten years. Up to now, there are still many construction units and commercial concrete manufacturers that have not used pump truck lubricant to replace traditional cement mortar pipe lubricants. There are many reasons for this. There are costs and benefits, but you also need to understand the product, but you are not good at using it. Most of them are still worried about using it incorrectly, and they are also worried that the lubricant will affect the strength of the concrete and the quality of the project. These worries are normal. The market for lubricants is indeed a mixed bag, and product quality cannot be guaranteed. If you buy some lubricants that are not produced by regular manufacturers, it will indeed pose certain safety risks to the quality of the building.

The safety hazard is mainly reflected in the fact that it is too corrosive to steel. In order to quickly dissolve the lubricating materials in the lubricants produced by some irregular small workshops, industrial salts are added to the materials. Who is the natural enemy of steel? Salt should be the biggest natural enemy of steel. Salt will make steel rust and corrode steel quickly. In addition to being corrosive to construction steel, inferior lubricants are also highly corrosive to pump trucks that pump concrete, which will accelerate the rapid aging and damage of pump truck accessories. A good lubricant contains no salt. When the lubricant comes into contact with water, it will naturally dissolve and will not corrode building steel and pumping equipment.

High-quality lubricant has a very good lubricating effect. As long as the slump of the concrete is well controlled and there are no debris in the pump pipe, it can be opened smoothly without causing pipe blockage. If you buy a low-quality lubricant, its lubricating effect will be very poor and it will easily cause pipe blockage.

Finally, it is recommended that the majority of commercial concrete manufacturers and construction units must choose lubricating agents produced by regular large manufacturers when purchasing lubricating agents, and do not be greedy for cheap. If the lubrication effect is not achieved, it is very easy to Cause pipe blockage, cause unnecessary equipment damage and delay the construction period. </p