author:
malin
Post: 2020年6月11日 110read Comments Off
Overview:Chinese name: N,N,N'-trimethyl-N'-hydroxyethyl bisaminoethyl ether, trimethylhydroxyethyl bisaminoethyl etherAlias: trimethylhydroxyethyl bisaminoethyl ether, CAS 83016-70-0, trimethylhydroxyethyl bisaminoethyl ether, Jeffcat ZF-10, high efficiency reactive foaming catalyst, reactive foaming catalystEnglish name: N,N,N'-trimethyl-N'-hydroxyethyl-bisaminoethyletherMolecular formula: C9H22N2O2Relative molecular mass: 191.2CAS number: 83016-70-0Trimethylhydroxyethyl bisaminoethyl ether Trimethylhydroxyethyl bisaminoethyl ether CAS 83016-70-0 Trimethylhydroxyethyl bisaminoethyl ether Jeffcat ZF-10 High efficiency reactive foaming catalyst Reaction Type foaming catalysttrimethylhydroxyethyl bisaminoethyl etherPhysical and chemical properties:Trimethylhydroxyethyl diaminoethyl ether is a colorless or light yellow liquid, soluble in water.Relative density (25℃): 0.95Viscosity (25℃): 12mPa.sHydroxyl value: 295mgKOH/gFlash point (PMCC): 118℃application:Trimethylhydroxyethyl bisaminoethyl ether contains hydroxyl groups and is a high-efficiency reactive foaming catalyst with low emission. It is used for polyether polyurethane flexible foam, molded foam, and hard foam for packaging. The hydroxyethyl bisaminoethyl ether can be used to replace the traditional catalyst bis(dimethylaminoethyl) ether in an equal amount to reduce VOC emissions in the system.Storage and transportation:Should be sealed and stored in a dry, cool and ventilated warehousepackage:200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/458
微信扫一扫打赏
