Epoxy curing agent Knowledge Covestro Desmophen C2200 linear polycarbonate diol 2000 molecular weight solid

Covestro Desmophen C2200 linear polycarbonate diol 2000 molecular weight solid

广告位

Covestro Desmophen C2200 linear polycarbonate diol 2000 molecular weight solid

Features Linear hydroxyl-terminated aliphatic polycarbonate diol, molar mass is approximately 2.000g/mol; used as base material for high-grade polyurethane systems

Form of supply Solvent-free, waxy at room temperature

Specifications

Features

Value

Measurement units

Method

hydroxyl content

1.7±0.2

%

DIN 53240/2

Viscosity@75°C

2300±750

mPa·s

DIN EN ISO 3219/B

HazenColor value

≤150

DIN EN 1557

Other data*

Features

Value

Measurement units

Method

Equivalent

about1000

Density@20

about1.14

g/cm3

DIN 51757

Water content

about0.05

%

DIN 51777/1

acid value

about0.1

mg KOH/g

DIN EN ISO 2114

*This data is general information and is not part of the product manual.

Features/Applications
Combined with polyisocyanate as a high-grade base material for the formulation of polyurethane systems with good weather resistance, light resistance and hydrolysis resistance.

Save
- Store in original Bayer MaterialScience sealed containers.
- Recommended storage temperature: 0-30℃.
- Protect from moisture, heat and foreign matter.
General information: This product is hygroscopic and must be heated to approximately 60°C and stirred well before sampling. The ingress of moisture must be avoided.

Storage Time
Provided that the product is stored in full compliance with the requirements in the "Storage" clause above and handled appropriately, the product shall comply with the requirements within 6 months from the date of shipment stated on the transport document The specifications or characteristic values ​​stated in the "Specifications or Characteristic Values" clause above (as appropriate). If a product exceeds the above 6-month period, it does not mean that it no longer meets the specifications or the values ​​set in the characteristic values. However, it is recommended that products more than 6 months from the date of shipment be tested before use to confirm whether they still meet the values ​​set in the specifications or characteristic values. The manufacturer does not make any commitments for products that are more than 6 months from the date of shipment, nor does it assume any responsibility or liability for products that do not meet the specifications or the set values ​​in the characteristic values.

ffffff">about0.1

mg KOH/g

DIN EN ISO 2114

*This data is general information and is not part of the product manual.

Features/Applications
Combined with polyisocyanate as a high-grade base material for the formulation of polyurethane systems with good weather resistance, light resistance and hydrolysis resistance.

Save
- Store in original Bayer MaterialScience sealed containers.
- Recommended storage temperature: 0-30℃.
- Protect from moisture, heat and foreign matter.
General information: This product is hygroscopic and must be heated to approximately 60°C and stirred well before sampling. The ingress of moisture must be avoided.

Storage Time
Provided that the product is stored in full compliance with the requirements in the "Storage" clause above and handled appropriately, the product shall comply with the requirements within 6 months from the date of shipment stated on the transport document The specifications or characteristic values ​​stated in the "Specifications or Characteristic Values" clause above (as appropriate). If a product exceeds the above 6-month period, it does not mean that it no longer meets the specifications or the values ​​set in the characteristic values. However, it is recommended that products more than 6 months from the date of shipment be tested before use to confirm whether they still meet the values ​​set in the specifications or characteristic values. The manufacturer does not make any commitments for products that are more than 6 months from the date of shipment, nor does it assume any responsibility or liability for products that do not meet the specifications or the set values ​​in the characteristic values.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/63746

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search