Epoxy curing agent Knowledge Evonik TEGO Foamex 810 defoaming agent concentrate

Evonik TEGO Foamex 810 defoaming agent concentrate

广告位

Evonik TEGO Foamex 810 defoaming agent concentrate

Products Description

TEGO Foamex 810 defoamer concentrate, general application first half defoamer , used in the lower half can effectively eliminate microbubbles.

Application Suggestions

Brush application/roller application

4

Airless spray

4

Compressed air spray

5

Letterpress/gravure printing

5

Dip coating, flow coating, shower coating

3

Floor bed

3

Note: 0=not applicable 5=highly applicable

Suitable Sex

Project

Typical data

Water-based

Suitable

Solvent-based

Generally suitable

Two-liquid type 100%

Discomfort�

Radiation Curing

Generally suitable

Transparent paint

Generally suitable

Pigmented

Suitable

Add At

Grinding section

Suitable

Second half

Generally suitable

Solubility

Project

Typical data

Water

Insoluble

Ethanol

turbid but stable

Tripropylene glycol diacrylate (TPGDA)

Clear and soluble

Butyl acetate

turbid but stable

Petroleum solvent

Clear and soluble

Suggestions Adding amount

Calculated based on the original product and the total formula: 0.05-0.5%

Use Description

Especially suitable for grinding

High shear force or pre-thinning is required when added to the lower half or varnish

The long-term effectiveness of defoaming agents is formulation dependent and should be tested in individual formulations (Recommended at different temperatures)

Recipe Suggestions

Stronger efficacy alternatives: TEGO Foamax 883, TEGO Foamax 842, better compatibility Capacitive alternatives: TEGO Foamax 860, TEGO Foamax 830

Chemistry Structure

Polyethersiloxane copolymer, oxygen-containing silica

Technology Parameters

Project

Typical data

Appearance

Slightly turbid liquid

Active ingredients

100%

Contact Suitability of food

Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6

Detailed BfR and 10/2011 status information available on request

Save Security

When stored in original unopened packaging, between -40 and +40℃ time, the storage period of this product is at least 36 months from the date of manufacture.

ong> Recommended amount

Calculated based on the original product and the total formula: 0.05-0.5%

Use Description

Especially suitable for grinding

High shear force or pre-thinning is required when added to the lower half or varnish

The long-term effectiveness of defoaming agents is formulation dependent and should be tested in individual formulations (Recommended at different temperatures)

Recipe Suggestions

Stronger efficacy alternatives: TEGO Foamax 883, TEGO Foamax 842, better compatibility Capacitive alternatives: TEGO Foamax 860, TEGO Foamax 830

Chemistry Structure

Polyethersiloxane copolymer, oxygen-containing silica

Technology Parameters

Project

Typical data

Appearance

Slightly turbid liquid

Active ingredients

100%

Contact Suitability of food

Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6

Detailed BfR and 10/2011 status information available on request

Save Security

When stored in original unopened packaging, between -40 and +40℃ time, the storage period of this product is at least 36 months from the date of manufacture.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/68476

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search