Epoxy curing agent Knowledge Cantharidin Cantharidin

Cantharidin Cantharidin

广告位

cantharidin structural formula

Structural formula

Business number 017D
Molecular formula C10H12O4
Molecular weight 196.4
label

Hexahydro-3α,7α-dimethyl-4,7-oxyisobenzofuran-1,3-dione,

Cantharidin,

Hexahydro-3α,7α-dimethyl-4,7-epoxyisobenzofuran-1,3-dione,

Inhibits protein and nucleic acid synthesis in cancer cells

Numbering system

CAS number:56-25-7

MDL number:MFCD00134968

EINECS number:200-263-3

RTECS number:RN8575000

BRN number:None

PubChem number:24278334

Physical property data

1. Properties: This product is white crystal

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/ mL, air = 1): Undetermined

4. Melting point (ºC): 216~218℃

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 5.2kPa): Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC ): Undetermined

12. Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined Determined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Insoluble in cold water, soluble in hot water, acetone, chloroform, ethyl acetate and oils, slightly soluble in ethanol.

Toxicological data

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 45.68

2. Molar volume (cm3/mol): 144.0

3. Isotonic specific volume (90.2K ): 381.5

4. Surface tension (dyne/cm): 49.2

5. Polarizability (10-24cm3):18.11

Calculate chemical data

1. Hydrophobic parameter calculation reference value (XlogP): 0.6

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds�: 0

5. Number of tautomers:

6. Topological molecular polar surface area (TPSA): 52.6

7. Number of heavy atoms : 14

8. Surface charge: 0

9. Complexity: 318

10. Number of isotope atoms: 0

11 , Determine the number of atomic stereocenters: 4

12. Determine the number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None yet

Storage method

Sealed packaging in brown glass bottles. Store in cool and dark place.

Synthesis method

1. Cantharidin is a monoterpene substance extracted from the coleopteran insect Cantharidin of the genus Cantharidin. The content in adult insects is about 1%.

First, crush the cantharis into powder. Feed according to the ratio of cantharis coarse powder:concentrated hydrochloric acid:acetone=1:0.025:5.5. Take the dry coarse powder and add concentrated hydrochloric acid, then add 3 times the amount of acetone, soak and extract for 48 hours, then filter with double-layer gauze, collect the filtrate, and soak the residue in 2.5 times the amount of acetone for 48 hours, filter, collect the extracts, and combine the extractions liquid and discard the residue. The acetone in the extract is recovered to obtain a dark concentrated oil. A large number of crystals precipitate out of the oil. Filter and collect the crystals. The crystals are washed twice with petroleum ether to remove pigments and animal fats, then washed several times with 95% ethanol, and dried to obtain crude cantharidin. The crude product is recrystallized once with acetone to obtain cantharidin. Cantharidin is highly toxic, so precautions should be taken when preparing it. Green tea and coptis can detoxify it.

2. This product is a tincture prepared by drying the insect Cantharidin [Epicauta gorhami marseul (Meloidae)] and leaching it with ethanol. To prepare 1000ml of this product, first dry the cantharis, take 100g of the crushed coarse powder, add about 600ml of ethanol, stir occasionally to allow the soluble ingredients to fully dissolve, and filter with cloth. Then wash the residue with a small amount of ethanol and press dry. Combine the leachate and washing liquid, let it sit for 2 days and then filter. Add ethanol to the filtrate to make it 1000ml.

Purpose

1. Cantharidin can inhibit the protein and nucleic acid synthesis of cancer cells, thereby controlling their massive proliferation. It has certain efficacy in the treatment of primary liver cancer and is often used in conjunction with other anti-tumor drugs. In addition, it also has certain effects on breast cancer, esophageal cancer, leukopenia, lung cancer, chronic hepatitis and other diseases.

2.This product is only used in hair growth products. It is prohibited in other cosmetics. The maximum allowable content is 1%. External use to treat malignant sores, stubborn ringworm, psoriasis, and alopecia areata.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/79608

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search