Epoxy curing agent Knowledge Tetramethylsilane Tetramethylsilane

Tetramethylsilane Tetramethylsilane

广告位

Tetramethylsilane structural formula

Structural formula

Business number 01K1
Molecular formula C4H12Si
Molecular weight 88.22
label

Tetramethylsilane,

Tetramethylsilane,

tetramethyl silicon,

Silicon Tetramethyl,

Tetramethylsilicane,

Si(CH3)4,

inorganic solvents,

NMR reagents

Numbering system

CAS number:75-76-3

MDL number:MFCD00008274

EINECS number:200-899-1

RTECS number:None

BRN number:1696908

PubChem number:24889006

Physical property data

1. Properties: colorless hygroscopic liquid, easily volatile. [1]

2. Melting point (℃): -99[2]

3. Boiling point (℃): 26~27[3]

4. Relative density (water=1): 0.65 (20℃)[4]

5. Saturated vapor pressure (kPa): 80.3 (20℃)[5]

6. Critical pressure (MPa): 2.81[6]

7. Octanol/water partition coefficient: 3.24[7]

8. Flash point (℃): -27.22[ 8]

9. Ignition temperature (℃): 450[9]

10. Explosion upper limit (%): 37.9[10]

11. Lower explosion limit (%): 1[11]

12. Solubility: insoluble in water and cold concentrated sulfuric acid, soluble in most organic solvents such as ether. [12]

Toxicological data

1. Acute toxicity No data available

2. Irritation No data available

3. Subacute and chronic toxicity [13] Rats (4 males) inhaled vapor 3.6g/m3, 6 hours, 15 times, resulting in lethargy and organ congestion.

Ecological data

Not harmful to water.

Molecular structure data

1. Molar refractive index: 29.29

2. Molar volume (cm3/mol): 130.2

3. Isotonic specific volume (90.2K ): 250.4

4. Surface tension (dyne/cm): 13.6

5. Polarizability (10-24cm3): 11.61 p>

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 5

8. Surface charge: 0

9. Complexity: 19.1

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Chemically stable, not concentratedDecomposed by sulfuric acid or strong alkali. Under ultraviolet irradiation, it can be chlorinated into chloromethyltrimethylsilane. Tetramethylsilane has high thermal stability and only begins to decompose at 660 to 720°C.

2. Stability[14] Stable

3. Incompatible substances[15] Strong oxidants, strong acids, strong bases

4. Avoid humid conditions [16] Humid air

5. Hazards of aggregation[17] No aggregation

Storage method

Storage Precautions[18] Store in a cool, dry and well-ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 29℃. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants, acids, and alkalis, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

It can be prepared by reacting tetrachlorosilane or ethyl orthosilicate with methylmagnesium iodide. It can also be prepared by reacting methyl chloride and silicon powder in the presence of copper catalyst. It is produced by reacting at high temperature and then carefully fractionating it. Since silicon has low electronegativity and has little effect on the hydrogen atoms on the four methyl groups, it can give a stronger signal and a sharp absorption peak in the nuclear magnetic resonance spectrum, while the protons in other general organic compounds The absorption peaks all appear to its left. Therefore, TMS is usually used as the internal standard for chemical shifts in NMR spectra, and its chemical shift is set to zero.

Purpose

1. Used as reagents, aviation fuel, solvents, and nuclear magnetic resonance reagents.

2. Used as reagents and aviation fuel. [19]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/80480

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search