Epoxy curing agent Knowledge Ethyl ether Ethyl ether

Ethyl ether Ethyl ether

广告位

Ether structural formula

Structural formula

Business number 01B8
Molecular formula C4H10O
Molecular weight 74.12
label

ethoxyethane,

diethyl ether,

Diethyl ether,

Ether,

Ethoxyethane,

Ethyl oxide,

Anesthetic ether,

Dehydrating solvents for organic synthesis,

organic acid extractant,

Anesthetic,

Ether solvent

Numbering system

CAS number:60-29-7

MDL number:MFCD00011646

EINECS number:200-467-2

RTECS number:KI6775000

BRN number:1696894

PubChem number:24857834

Physical property data

1. Properties: colorless and transparent liquid with aromatic odor and highly volatile. [1]

2. Melting point (℃): -116.2[2]

3. Boiling point (℃): 34.6[3]

4. Relative density (water=1): 0.71 (20℃)[4]

5. Relative vapor density (air = 1): 2.56[5]

6. Saturated vapor pressure (kPa): 58.92 (20℃)[6]

7. Heat of combustion (kJ/mol): -2748.4[7]

8. Critical temperature (℃): 192.7[8]

9. Critical pressure (MPa): 3.61[9]

10. Octanol/water partition coefficient: 0.89[10]

11. Flash point (℃): -45 (CC) [11]

12. Ignition temperature (℃): 160~180[12]

13. Explosion upper limit (%): 49.0[13]

14. Lower explosion limit (%): 1.7[14]

15. Solubility: slightly soluble in water, soluble in ethanol, benzene, chloroform, solvent naphtha Most organic solvents such as oil. [15]

16. Melting point (ºC, stable type): -116

17. Melting point (ºC, unstable type): -116.3

18. Relative density (g/mL, 0/4ºC): 0.7364

19. Relative density (g/mL, 10/4ºC): 0.7249

20. Relative density (g/mL, 25/4ºC): 0.706

21. Relative density (g/mL, 30/4ºC): 0.7019

22. Refractive index (n20ºC ): 1.3524

23. Refractive index (n25ºC): 1.3495

24. Viscosity (mPa·s, 20ºC): 0.2448

25. Viscosity (mPa ·s, 25ºC): 0.2230

26. Heat of evaporation (KJ/mol, 30ºC): 26.02

27. Heat of fusion (KJ/kg): 98.53

28. Heat of formation (KJ/kg, 25ºC): -272.98

29. Heat of combustion (KJ/kg, 20ºC): 2728.53

30. Specific heat capacity (KJ/( kg·K), 0ºC, constant pressure): 2.25

31. Specific heat capacity (KJ/(kg·K), 30ºC, constant pressure): 2.30

32. Specific heat capacity (KJ /(kg·K), 120ºC, constant pressure): 3.36

33. Specific heat capacity (KJ/(kg·K), 180ºC, constant pressure): 4.36

34. Boiling point Rise constant: 21.6

35. Conductivity (S/m, 25ºC): 3.7×10-13

36. Volume expansion coefficient (K-1): 0.00164

37. Body expansion coefficient (K-1, 0~1L concentrated sulfuric acid, mix evenly, and then add a few grains of zeolite. Heat to 140°C with an electric heating mantle. Add 100mL of 95% ethanol (2) dropwise from the dropping funnel, control the dropping speed to be basically the same as the elution speed of ether (1-2 drops/second), and keep the liquid temperature between 135-140°C, add for about 3 hours over. After the addition is completed, the heating reaction is continued for 10 minutes. When the temperature rises to 160°C, the reaction is stopped. Wash the distilled solution with 5% sodium hydroxide aqueous solution, saturated sodium chloride solution, saturated calcium chloride solution in sequence, and dry over anhydrous calcium chloride. Heating and distilling in a water bath, collecting the fractions at 33-38°C to obtain 40g of diethyl ether(1), with a yield of 48%. Note: ① When washing with saturated calcium chloride solution and drying with calcium chloride, in addition to removing water, a small amount of ethanol can also be removed, because ethanol can form a complex with calcium chloride.

② Ether (including other ethers Compounds) are easily oxidized to form peroxides. Peroxides are prone to danger during distillation. Therefore, in some reactions or before distillation, the presence of peroxide should first be checked and removed. For specific methods, see the appendix Preparation and Purification Methods of Commonly Used Organic Solvents and Reagents. [27]

Purpose

1. Used as a solvent and an important anesthetic in medicine. Mixed with ethanol to dissolve nitrocellulose in the production of smokeless gunpowder, cotton glue and photographic films. It can be used as a solvent for grease, resin, wax, rubber, alkaloids, organic metal compounds, etc. Mixtures with ethanol are excellent solvents for nitrocellulose. In addition, it is also used as organic synthesis solvent, organic acid extractant and anesthetic.

2. Analytical reagents, used for the analysis of nickel, potassium, magnesium, etc. Used as solvents, cleaning agents, pharmaceuticals, electronics and other industries.

3. Used as analytical reagents, such as solvents, extractants, liquid chromatography eluents and solvents. Also used as an anesthetic.

4. Used as a solvent and an anesthetic in medicine. [26]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/83209

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search