Epoxy curing agent Knowledge Methylparaben Methyl 4-hydroxybenzoate

Methylparaben Methyl 4-hydroxybenzoate

广告位

Methyl paraben structural formula

Structural formula

Business number 02GF
Molecular formula C8H8O3
Molecular weight 152.15
label

Methylparaben,

Methyl 4-hydroxybenzoate,

4-Hydroxybenzoic acid methyl ester,

Methyl p-hydroxybenzoate,

Methylparaben,

Preservative additives

Numbering system

CAS number:99-76-3

MDL number:MFCD00002352

EINECS number:202-785-7

RTECS number:DH2450000

BRN number:509801

PubChem number:24895585

Physical property data

1. Properties: Colorless crystals or white crystalline powder, odorless or slightly pungent odor.

2. Relative density (20℃, 4℃): 1.1208137.2

3. Relative density (25℃, 4℃): 1.1097150.4

4. Melting point (ºC): 131

5. Boiling point (ºC, normal pressure): 275 (decomposition)

6 . Boiling point (ºC, mmHg): Not determined

7. Refractive index: Not determined

8. Flash point (ºC): Not determined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg,ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature ( ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Slightly soluble in water, soluble in alcohol, ether, acetone, slightly soluble in benzene and carbon tetrachloride.

20. Freezing point (ºC): 131

Toxicological data

1. Acute toxicity: Rat subcutaneous LD50: >500mg/kg; Mouse oral LC50: >8mg/kg; Mouse peritoneal cavity LD50: 960mg/kg; Mouse subcutaneous LC50: 1200mg/kg; Rabbit oral LD50: 6mg/kg; Guinea pig oral LD50: 3mg/kg; 2. Mutagenicity: Cell generation analysis test: hamster lung, 125mg/L/27H;   Cell generation analysis test: hamster fibroblasts, 500mg/L;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 39.88

2. Molar volume (cm3/mol): 116.6

3. Isotonic specific volume (90.2K ): 322.0

4. Surface tension (dyne/cm): 58.0

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 15.81

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: 4

6. Topological molecule polar surface area 46.5

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 136

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with strong oxidants, strong acids, and strong alkali.

2. Exist in smoke.

Storage method

1. Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants, acids, and alkalis, and avoid mixed storage.

2. Equip with corresponding varieties and quantities of fire-fighting equipment. Suitable materials should be available in the storage area to contain spills.

Synthesis method

1. Obtained from the esterification of p-hydroxybenzoic acid and methanol. Add excess methanol to dissolve p-hydroxybenzoic acid, and slowly add concentrated sulfuric acid while stirring. Heating to reflux for 10 hours, pour into water to precipitate crystals, and wash with water, sodium carbonate solution, and water to obtain crude product. The finished product is obtained by recrystallizing with water or 25% ethanol. The yield is 85%. Raw material consumption (kg/t) p-hydroxybenzoic acid 1200 methanol 1000

Purpose

Cosmetic preservatives. It is a phenolic preservative and is effective against various molds, yeasts, and bacteria. However, paraben has low bactericidal power. It is usually mixed with ethyl paraben and has good additivity and synergy. Adding amount is 0.1%~1.0%. The antiseptic activity is related to the pH value of the solution. When the pH value is 7, its activity is 2/3 of the original activity; if the pH value is 8.5, the activity is reduced to half of the original activity. It will be bound by some polymer compounds such as methylcellulose, gelatin protein, etc., causing it to lose its preservative activity.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/83809

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search