Epoxy curing agent Knowledge p-Chloroacetophenone p-Chloroacetophenone

p-Chloroacetophenone p-Chloroacetophenone

广告位

Structural formula of p-chloroacetophenone

Structural formula

Business number 02GR
Molecular formula C8H7ClO
Molecular weight 154.59
label

p-Chloroacetylbenzene,

4′-Chloroacetophenone,

4-Chloroacetophenone,

p-Chloroacetophenone,

1-(4-Chlorophenyl)-ethanon,

1-(4-Chlorophenyl)ethanone[qr],

Aromatic aldehydes, ketones and their derivatives

Numbering system

CAS number:99-91-2

MDL number:MFCD00000624

EINECS number:202-800-7

RTECS number:KM5600000

BRN number:386014

PubChem number:24853689

Physical property data

1. Properties: colorless liquid.

2. Density (g/mL, 25℃): 1.192

3. Relative density (20℃, 4℃): 1.1992

4. Melting point (ºC): 20

5. Boiling point (ºC, normal pressure): 234

6. Relative density (25℃, 4℃): 1.1885

7. Refractive index: 1.554

8. Flash point (ºC): 90

9. Refractive index at room temperature (n20): 1.5550

10. Refractive index at room temperature (n25): 1.5528

11. Vapor pressure (mmHg, 90 ºC): 8

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit ( %, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Insoluble in water, soluble in organic solvents .

Toxicological data

1. Acute toxicity: Human inhalation TCL0: 1mg/m3/4H; Mouse oral LD50: 1207mg/kg Mouse inhalation LC50: 1752mg/m3/15M; Mouse peritoneal cavity LD50: 100mg/kg; 2. Other multiple doses Toxicity: mice inhaled TCLo: 87600μg/m3/15M/10D-I;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 41.17

2. Molar volume (cm3/mol): 132.9

3. Isotonic specific volume (90.2K ): 328.3

4. Surface tension (dyne/cm): 37.2

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 16.32

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: 2

6. Topological molecule polar surface area 17.1

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 125

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with oxidants.

2.This product is toxic and strongly irritates the eyes, nose and throat. Protective glasses, protective clothing, and protective gloves should be worn. Combustion produces irritating, corrosive/toxic gases.

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. should be kept away from oxidizer, do not store together. Equipped with the appropriate variety and quantity of fire equipment. Suitable materials should be available in the storage area to contain spills. Packed in iron drums, 200kg/drum.

Synthesis method

Obtained from the reaction of chlorobenzene and acetic anhydride: Heat and stir anhydrous aluminum trichloride, anhydrous carbon disulfide and dry chlorobenzene, and slowly drop in acetic anhydride while it is slightly boiling. After the addition, stir and reflux for 1 hour to recover carbon disulfide. When the reactants are cooled to room temperature and warm, slowly pour them into crushed ice containing hydrochloric acid while stirring. The layers should be clear. If they are not clear, add a little hydrochloric acid. Pour a small amount of benzene into this solution and extract, collect the oil layer, and extract the water layer again with benzene. Combine the extract and the oil layer, wash away the acidity with about 15% sodium hydroxide, then wash with water until neutral, and dry. After distillation under reduced pressure, collect the crude fraction, freeze it for 48 hours, separate the mother liquor, and melt the crystals to obtain the finished product. The yield is 83.1%.

Purpose

Used as fluorescent whitening agent, pharmaceutical and intermediate raw material

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/83870

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search