Epoxy curing agent Knowledge p-Nitrophenetole 4-Nitrophenetole

p-Nitrophenetole 4-Nitrophenetole

广告位

Structural formula of p-nitrophenylethyl ether

Structural formula

Business number 02HM
Molecular formula C8H9NO3
Molecular weight 167.16
label

p-Nitrophenyl ether,

4-Nitrophenylethyl ether,

1-ethoxy-4-nitrobenzene,

p-Nitroethoxybenzene,

p-Ethoxynitrobenzene,

P-Nitrophenetole,

4-Nitrophenetol,

4-Nitrophenetole,

1-Ethoxy-4-nitrobenzene,

Aromatic nitrogen-containing compounds and their derivatives

Numbering system

CAS number:100-29-8

MDL number:MFCD00007330

EINECS number:202-837-9

RTECS number:DA0600000

BRN number:972473

PubChem ID:None

Physical property data

1. Character: light yellow columnar crystal [1]

2. Melting point (℃): 59~60[2]

3. Boiling point (℃): 283[3]

4. Relative density (water=1): 1.18[4]

5. Heat of combustion (kJ/mol): -4205.1[5]

6. Octanol/water partition coefficient: 2.53 [6]

7. Solubility: insoluble in water, soluble in ethanol, soluble in hot petroleum ether, easily soluble in hot ethanol and ether, miscible in acetone and benzene. [7]

Toxicological data

1. Acute toxicity: rat oral LD50: 3300mg/kg; rat skin contact LD50: >16mg/kg; rat peritoneal cavity LD50: 2100mg/kg; rabbit skin contact LD50: >7940mg/kg;

2. Mutagenicity: Mutant microorganism test: bacteria-Salmonella typhimurium, 250μg/plate; DNA repair test: Bacillus subtilis, 5mg/disc.

3. Acute toxicity [8]

LD50: 3300mg/kg (rat oral); >16g/ kg (rat transdermal); >7940mg/kg (rabbit transdermal)

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradability No information available

Molecular structure data

1. Molar refractive index: 44.10

2. Molar volume (cm3/mol): 141.7

3. Isotonic specific volume (90.2K ): 359.2

4. Surface tension (dyne/cm): 41.1

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 17.48

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 55

7. Number of heavy atoms: 12

8. Surface charge: 0

9. ComplexDegree: 147

10. Number of isotope atoms: 0

11. Determined number of atomic stereocenters: 0

12. Uncertain atomic configuration Number of centers: 0

13. Determined number of stereocenters of chemical bonds: 0

14. Uncertain number of stereocenters of chemical bonds: 0

15. Covalent Number of key units: 1

Properties and stability

1. Stability[9] Stable

2. Incompatible substances[10] Strong oxidants, strong reducing agents, strong acids, strong bases

3. Conditions to avoid contact[11] Heat

4. Polymerization hazard[12] No polymerization

5. Decomposition products[13] Nitrogen oxides

Storage method

1. Storage precautions[14] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The packaging is sealed. They should be stored separately from oxidants, reducing agents, acids, alkalis, and food chemicals, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. Suitable materials should be available in the storage area to contain spills.

2. Packaging adopts small opening steel drums, screw-top glass bottles, iron-top pressure-top glass bottles, plastic bottles or wooden crates outside metal drums (cans). Store in a cool, ventilated warehouse. Keep away from fire and heat sources, prevent direct sunlight, and keep the container tightly sealed. Load and unload with care when transporting.

Synthesis method

Prepared by etherification of p-nitrochlorobenzene and ethanol in the presence of sodium hydroxide. Add p-nitrochlorobenzene and ethanol into the reaction kettle, raise the temperature to 82°C, add ethanol sodium hydroxide solution dropwise, and react at 85-88°C for 3 hours. The alkalinity of the reaction solution drops below 0.9%, the temperature is lowered to 75°C, and the pH value is adjusted to 6.7-7 with concentrated hydrochloric acid. After standing for stratification, take the oil layer, wash it with heated water to remove the sodium nitrophenolate, carry out vacuum distillation of the oil layer, and take the 214-218℃ (2.66-5.32kpa) fraction as this product.

Purpose

1. Used as an intermediate for drugs and dyes. Used in medicine to synthesize phenacetin, etc.

2. Used as dye intermediate. [15]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/84431

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search