Epoxy curing agent Knowledge Isobutyl alcohol Isobutyl alcohol

Isobutyl alcohol Isobutyl alcohol

广告位

isobutanol structural formula

Structural formula

Business number 01NP
Molecular formula C4H10O
Molecular weight 74
label

2-Methyl-1-propanol,

isopropylmethanol,

fermented butanol,

1-Hydroxymethylpropane,

2-Methylpropanol,

1-Hydroxymethylpropane,

Fermentation butyl alcohol,

Aliphatic alcohols, ethers and their derivatives

Numbering system

CAS number:78-83-1

MDL number:MFCD00004740

EINECS number:201-148-0

RTECS number:NP9625000

BRN number:1730878

PubChem number:24881090

Physical property data

1. Properties: colorless and transparent liquid with a slight smell of amyl alcohol. [1]

2. Melting point (℃): -108[2]

3. Boiling point (℃): 107.9[3]

4. Relative density (water=1): 0.81 (15℃)[4]

5. Relative vapor density (air = 1): 2.55[5]

6. Saturated vapor pressure (kPa): 1.17 (20℃)[6]

7. Heat of combustion (kJ/mol): -2667.7[7]

8. Critical temperature (℃): 274.6[8]

9. Critical pressure (MPa): 4.3[9]

10. Octanol/water partition coefficient: 0.76[10]

11. Flash point (℃): 28 (CC); 37.7 (OC) [11]

12. Ignition temperature (℃): 415[12]

13. Explosion upper limit (%): 10.9[13]

14. Lower explosion limit (%): 1.2[14]

15. Solubility: soluble in water, easily soluble in ethanol and ether. [15]

16. Heat of formation (KJ/mol): -339.4

17. Heat of fusion (KJ/kg): 125.2

18. Specific heat capacity (KJ/(kg·K), constant pressure): 2.39

19. Boiling point rising constant: 2.01

20. Electrical conductivity (S/m ): 8×10-8

21. Thermal conductivity (W/(m·K), 0ºC): 15.49

22. Volume expansion Coefficient (K-1, 20ºC): 0.00095

23. Critical density (g·cm-3): 0.271

24. Critical volume (cm3·mol-1): 274

25. Critical compression factor: 0.258

26. Eccentricity factor: 0.589

27. Lennard-Jones parameter (A): 13.73

28. Lennard-Jones parameter (K): 158.5

29 .Solubility parameter (J·cm-3)0.5: 23.751

30. van der Waals area (cm2·mol-1): 7.620×109

31. van der Waals volume (cm3·mol -1): 52.390

32. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): 2720.10

33. Gas phase standard claimed heat (enthalpy) (kJ·mol-1): -283.09

34. Phase standard combustion heat (enthalpy) (kJ·mol -1): -2669.27

35. Liquid phase standard claims heat (enthalpy) (kJ·mol-1): -333.93

36. Liquid phase standard entropy (J·mol-1·K-1): 214.5

37. Liquid phase standard free energy of formation ( kJ·mol-1�

Purpose

1. Used as a co-solvent for nitrocellulose, a solvent for ethyl cellulose, polyvinyl butyral, various oils, rubber, and natural resins. Organic synthetic raw materials. Can be used to make petroleum additives, antioxidants, 2,6-di-tert-butyl-p-cresol, isobutyl acetate (paint solvent), plasticizers, synthetic rubber, artificial musk, fruit essential oils, esters and synthetic drugs wait. It can also be used to purify salt chemical reagents such as strontium, barium and lithium and as a high-grade solvent. The scope of application is limited and must not be used to make agricultural plastics because isobutanol can cause crop death.

2. Reagents for the determination of calcium, strontium, barium, sodium, potassium, lithium, silver, chlorine and phosphite. Chromatographic analysis of reference materials. It is also a commonly used solvent and extraction agent. Used to extract lithium chloride from a mixture of lithium chloride and sodium chloride or potassium chloride. Used in the manufacture of petroleum additives, antioxidants, 2,6-di-tert-butyl-p-cresol, isobutyl acetate (paint solvent), plasticizers, synthetic rubber, artificial musk; fruit essential oils and synthetic drugs, etc.

3. Basic organic chemical raw materials, used as diluents for adhesives and solvents for ethyl cellulose, polyvinyl butyral, rubber, natural resins and various oils. It is also used as a raw material for petroleum additives, antioxidants, plasticizers, synthetic rubber, artificial musk, fruit essential oils, esters and synthetic drugs. It can also be used to purify strontium, barium, lithium and other salt chemical reagents. At present, domestic isobutanol is mainly used to produce diisobutyl phthalate plasticizer and isobutyl acetate solvent, and a small amount is used to produce isobutyl butyrate, isobutyl lactate, etc.

4. Mainly used as solvent and in organic synthesis. [26]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/84463

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search