Epoxy curing agent Knowledge Methacrylamide Methacrylamide

Methacrylamide Methacrylamide

广告位

Methacrylamide Structural Formula

Structural formula

Business number 01PU
Molecular formula C4H7NO
Molecular weight 85.10
label

2-Methacrylamide,

2-MethylPropenamide,

2-Methylacrylamide,

Methacrylic amide

Numbering system

CAS number:79-39-0

MDL number:MFCD00008018

EINECS number:201-202-3

RTECS number:UC6475000

BRN number:605397

PubChem number:24882665

Physical property data

1. Properties: The pure product is white crystal, while the industrial product is slightly yellow.

2. Density (g/mL, 25/4℃): 1.115

3. Relative vapor density (g/mL, air=1): Uncertain

4. Melting point (ºC): 110~111

5. Boiling point (ºC, normal pressure): 215

6. Boiling point (ºC, 5.2kPa): Uncertain

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Specific rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

12. Saturated vapor Pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature (ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (%, V/V): Uncertain

18. Lower explosion limit (%, V/V): Uncertain

19. Solubility: Soluble in ethanol, methylene chloride, slightly soluble In ether and chloroform.

Toxicological data

1. Acute toxicity

Human inhalation LC50: 3mg/m3;

Rat caliber LD50: 459g/kg; Rat skin LD50: >6mg/kg;

p>

Mouse caliber LD50: 451mg/kg; mouse skin LD50: >6mg/kg;

Rat abdominal cavity LD50: 200mg/kg;

Rabbit skin LD50 : 650 uL/kg;

2. This product is toxic, one-tenth less toxic than acrylamide, but its vapor may cause central nervous system disorders after inhalation through the respiratory tract or absorption through the skin.

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 23.71

2. Molar volume (cm3/mol): 90.2

3. Isotonic specific volume (90.2K ): 210.5

4. Surface tension (dyne/cm): 29.6

5. Polarizability (10-24cm3): 9.40

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 0.1

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: 2

6. Topological molecule polar surface area 43.1

7. Number of heavy atoms: 6

8. Surface charge: 0

9. Complexity: 85.5

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. This product is toxic, one-tenth less toxic than acrylamide, but its vapor may cause central nervous system disorders after inhalation and percutaneous absorption through the respiratory tract. Danger. During operation, masks and gas masks should be worn to prevent direct contact with
skin.

2. Exist in smoke.
 

Storage method

This product should be sealed and stored in a cool, dark place.

This product is packed in plastic bags to prevent heat and sun. It should be stored in a cool and ventilated place below 20℃. The shelf life is 6 months. Store and transport according to regulations on toxic substances.

Synthesis method

Using sodium cyanide as raw material and reacting with sulfuric acid to produce hydrocyanic acid, hydrocyanic acid reacts with acetone to form acetone cyanohydrin, reacts with concentrated sulfuric acid to form methacrylamide sulfate, and then neutralizes it with ammonia to produce The finished product methacrylamide is obtained. Hydrogen cyanide is produced by reacting sodium cyanide with sulfuric acid. Methacrylamide sulfate is prepared from hydrocyanic acid. The production method is the same as that of methacrylic acid. The obtained methacrylamide sulfate is neutralized with ammonia water, extracted, crystallized, filtered, and dried at low temperature to obtain the finished product. Using sodium cyanide as raw material to produce methacrylamide, each ton of product consumes 821kg of sodium cyanide, 883kg of acetone (≥98.5%), 3440kg of sulfuric acid, and 650kg of liquid ammonia.

Purpose

Methacrylamide is an intermediate in the production of methyl methacrylate.

Used in the production of methyl methacrylate. Used as fiber leveling agent, moisture absorbent, adhesive and antistatic agent.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/84960

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search