Epoxy curing agent Knowledge Benzenesulfonohydrazide Benzenesulfonohydrazide

Benzenesulfonohydrazide Benzenesulfonohydrazide

广告位

Phenylsulfonyl hydrazide structural formula

Structural formula

Business number 01QQ
Molecular formula C6H8N2O2S
Molecular weight 172.20
label

Phenylsulfonyl hydrazide,

Foaming agent BSH,

phenylsulfohydrazide,

blowing agent BSH,

porofor BSH,

Foaming agent

Numbering system

CAS number:80-17-1

MDL number:MFCD00007583

EINECS number:201-255-2

RTECS number:DB6888000

BRN number:640079

PubChem number:24891736

Physical property data

1. Properties: light yellow crystal, easy to deliquesce. [1]

2. Melting point (℃): 101~103[2]

3. Relative density (water =1): 1.41~1.43[3]

4. Octanol/water partition coefficient: -0.14[4]

5. Flash point (℃): 110[5]

6. Solubility: Insoluble in water. [6]

Toxicological data

1. Acute toxicity No data available

2. Irritation No data available

3. Others[7] LDLo: 50mg/kg (rat oral)

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradability No information available

Molecular structure data

1. Molar refractive index: 42.84

2. Molar volume (cm3/mol): 127.1

3. Isotonic specific volume (90.2K ): 341.2

4. Surface tension (dyne/cm): 51.8

5. Polarizability (10-24cm3): 16.98

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 80.6

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 201

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Nitrogen, hydrogen and water are generated after heating and decomposition. Soluble in aqueous solutions of inorganic acids and alkalis and some organic solvents, but insoluble in water. Reacts with ketones to obtain the corresponding sulfonylhydrazone. No reaction to vulcanization accelerators and antioxidants. Non-toxic. Storage is unstable and the product has a bad smell.

2. Stability[8] Stable

3. Incompatible substances[9] Strong oxidants, strong bases

4. Conditions to avoid contact[10] Friction and impact

5. Polymerization hazard[11] No polymerization

6. Decomposition products[12] Nitrogen oxides, sulfur oxides, nitrogen

Storage method

Storage Precautions[13] Stored in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 35℃. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants and alkalis, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. Suitable materials should be available in the storage area to contain spills.

Synthesis method

Dissolve benzene sulfonyl chloride in benzene according to the proportion, and send the prepared solution to the high-level tank for later use. Add hydrazine hydrate with a concentration of 40% and an appropriate amount of caustic soda into the stirred reaction kettle, and stir to dissolve into a uniform solution. Then, a benzene solution of benzene sulfonyl chloride was added while stirring at room temperature to perform a condensation reaction. The feeding speed should not be too fast to ensure a stable reaction, and the temperature should not exceed 50°C. After the reaction to generate benzene sulfonyl hydrazide is completed, add an appropriate amount of acid to neutralize it to make the reaction system neutral. Because benzene sulfonyl hydrazide is insoluble in water and benzene, it precipitates in solid form. The reaction product is filtered, and the filtrate is left to separate into layers. The upper layer is benzene, which can be recycled or recovered by distillation; the lower layer is an aqueous solution, and unreacted hydrazine hydrate can be recovered. The filter cake is washed with water several times to remove all the salt and other water-soluble substances contained in it, and then dried at 60°C to obtain the finished product.

Purpose

1. Foam materials used in the shoemaking industry, the dosage is 3% to 6.5%. Used for the hair growth of polyvinyl chloride, polyester, polyamide, polystyrene, phenolic resin, epoxy resin, butyl rubber, styrene-butadiene rubber, silicone rubber, polyolefin, styrene and acrylonitrile or butadiene copolymers The dosage of foaming agent is 1% to 15%. This product releases heat when decomposed and is generally mixed with sodium bicarbonate.

2. Used as a foaming agent to manufacture foam plastics and foam rubber. [14]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/86059

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search