Epoxy curing agent Knowledge 1-Bromo-3-chloropropane 1-Bromo-3-chloropropane

1-Bromo-3-chloropropane 1-Bromo-3-chloropropane

广告位

1-bromo-3-chloropropane structural formula

Structural formula

Business number 02ZK
Molecular formula C3H6BrCl
Molecular weight 157.44
label

1,3-bromochloropropane,

3-Chloro-1-bromopropane,

1-Chloro-3-bromopropane,

3-bromo-1-chloropropane,

Trimethylene chloride bromide compound,

1,3-bromopropane,

Trimethylene bromide chloride,

Aliphatic halogenated derivatives

Numbering system

CAS number:109-70-6

MDL number:MFCD00000998

EINECS number:203-697-1

RTECS number:TX4113000

BRN number:605278

PubChem number:24892149

Physical property data

1. Properties: colorless transparent liquid

2. Relative density (water=1): 1.5920

3. Relative vapor density (air=1): 5.5

p>

4. Melting point (ºC): -59

5. Boiling point (ºC, normal pressure): 144~145

6. Refractive index at room temperature (n20): 1.4866

7. Refractive index: 1.4864

8. Flash point (ºC): Undetermined

9. Specific rotation Degree (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor pressure (20ºC): 0.4719kpa

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined Determined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17 . Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: insoluble in water, Slightly soluble in glycerin, ether, ethanol, and chloroform.

Toxicological data

1. Acute toxicity: Rat oral LD50: 930mg/kg

Mouse oral LD50: 1290mg/kg

Rat inhalation LD50: 5668mg/m3

p>

Ecological data

This substance is harmful to the environment and it is recommended not to let it enter the environment. It can cause pollution to the atmosphere and water bodies, and is extremely destructive to the atmospheric ozone layer.

Molecular structure data

1. Molar refractive index: 28.52

2. Molar volume (cm3/mol): 102.6

3. Isotonic specific volume (90.2K ): 242.0

4. Surface tension (dyne/cm)��30.9

5. Polarizability (10-24cm3): 11.30

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 1.9

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 5

8. Surface charge: 0

9. Complexity: 16.4

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

It is forbidden to come into contact with strong oxidants, strong alkali and magnesium.

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Protect from direct sunlight. Keep container tightly sealed. They should be stored separately from oxidants and alkalis, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Obtained from the addition of α-chloropropene and hydrogen bromide. Inhale α-chloropropene into the bromination tank, add a small amount of benzoyl peroxide, and then pass hydrogen bromide into the bottom of the tank to control the reaction temperature. At 18°C, the end point is when the relative density reaches above 1.5. Wash the product with water, alkali wash (2% sodium hydroxide), then wash with water, separate the water layer, dehydrate with anhydrous calcium chloride for 24 hours, fractionate under normal pressure, separate out low boiling matter below 130°C, and then distill under reduced pressure , collect the fraction above 70℃ (21.3kPa) to obtain the finished product. Hydrogen bromide used in production is produced by the following method: add hydrobromic acid to sodium bromide, raise the temperature to 60°C, add sulfuric acid dropwise, and keep the reaction at 80-90°C to release hydrogen bromide gas.

2. Preparation method:

p>

Add newly fractionated 3-Chloropropene (2) 38g (0.5mol), cooled in an ice-water bath, irradiated with a low-pressure ultraviolet lamp, slowly introduce hydrogen bromide gas equivalent to 1.1 to 1.2 times of the 3-chloropropene input amount, for about 2 to 8 hours over. The reaction solution was washed three times each with water and 3% sodium bicarbonate until neutral. Dry anhydrous calcium chloride overnight, and then fractionate under reduced pressure. First steam out the low boiling matter, and then collect the 68-69°C/7.9kPa fraction to obtain 61.5g of 1,3-bromochloropropane (1), with a yield of 78%. . [1]

Purpose

Used in the manufacture of trifluoperazine hydrochloride and organic synthesis. It is used as a pharmaceutical intermediate, mainly used in the synthesis of chlorpromazine, trifluoperazine, perphenazine, clomipramine, pyonazine, doxepin hydrochloride, Telden and other products.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/86498

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search