Epoxy curing agent Knowledge Tobias acid Tobias acid

Tobias acid Tobias acid

广告位

Tobutyl acid structural formula

Structural formula

Business number 01RV
Molecular formula C10H9NO3S
Molecular weight 223.25
label

2-amino-1-naphthalenesulfonic acid; 2-naphthylamine-1-sulfonic acid,

2-Amino-1-naphthalenesulfonic acid,

2-Naphthylamine-1-sulfonic acid,

aromatic sulfur compounds

Numbering system

CAS number:81-16-3

MDL number:MFCD00003988

EINECS number:201-331-5

RTECS number:QK1250000

BRN number:613084

PubChem number:24857514

Physical property data

1. Properties: Those that crystallize in hot water are colorless and transparent flaky crystals, those that crystallize in cold water are white needle-like hydrated crystals.

2. Density (g/mL, 25/4℃): Uncertain

3. Relative vapor density (g/mL, air=1): Uncertain

4. Melting point (ºC): Uncertain

5. Boiling point (ºC, normal pressure): Uncertain

6. Boiling point (ºC, 5.2kPa): Uncertain Confirm

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Specific rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

12. Saturation Vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature (ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (% , V/V): Uncertain

18. Lower explosion limit (%, V/V): Uncertain

19. Solubility: soluble in hot water, slightly soluble in cold water , very slightly soluble in ethanol and ether.

Toxicological data

1. Acute toxicity

Mouse caliber LD50: 19400mg/kg

2. Neurotoxicity

Rabbit eye test: 500mg/24H

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 58.27

2. Molar volume (cm3/mol): 148.6

3. Isotonic specific volume (90.2K ): 433.1

4. Surface tension (dyne/cm): 72.1

5. Polarizability (10-24cm3): 23.10

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 1.8

2. Number of hydrogen bond donors: 2

3.  Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 1

5. Topological molecular polar surface area (TPSA): 80.4

6. Number of heavy atoms: 15

7. Surface charge: 0

8. Complexity: 322

9. Number of isotope atoms: 0

10. Determine the number of atomic stereocenters: 0

11. Uncertain number of atomic stereocenters: 0

12. Determine the number of chemical bond stereocenters: 0

13. Number of uncertain stereocenters of chemical bonds: 0

14. Number of covalent bond units: 1

Properties and stability

Easily oxidized and toxic LD501.9g/kg will have a certain irritating effect after instilling 500mg into the eyes of rabbits for 24 hours. Operators should wear protective equipment.
Toxic, oral LD50 in rats: 1900 mg/kg. The raw material 2-naphthol is toxic, has a strong irritating effect on the skin and mucous membranes, is easily absorbed through the skin, and is highly corrosive; chlorosulfonic acid is a first-class inorganic acid corrosive and can cause severe burns in contact with the skin.

Storage method

This product should be stored in a sealed, cool, dry place away from light.

Packed in sacks lined with plastic bags, polypropylene woven bags or wooden boxes. Net weight of each bag is 50kg. Store in a cool, dry and ventilated place. During storage and transportation, pay attention to sun protection, moisture protection and fire protection. Store and transport according to regulations for toxic chemicals

Synthesis method

2-naphthol is sulfonated with chlorosulfonic acid in o-nitroethylbenzene solvent to generate 2-naphthol-1-sulfonic acid, which is neutralized with soda ash 2-Naphthol-1-sodium sulfonate is separated and ammonolyzed with liquid ammonia in the presence of ammonium bisulfite to obtain 2-naphthylamine-1-sodium sulfonate, which is then acidified with hydrochloric acid and filtered to obtain 2-naphthylamine. Amine-1-sulfonic acid.

Purpose

Used in organic synthesis. Dye intermediates. Mainly used for the preparation of J acid, bis J acid, scarlet acid, gamma acid, naphthol AS-SW, reactive red K-1613, brilliant red K-10B, reactive brilliant red M-3BE, organic purple red, Lisol purple red, Lisol Red R, etc., as well as fluorescent whitening agents, etc.

Mainly used in the dye industry as an intermediate for azo dyes, azo pigments and optical brighteners.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/86630

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search