Epoxy curing agent Knowledge 2,4-Dimethylpentane 2,4-Dimethylpentane

2,4-Dimethylpentane 2,4-Dimethylpentane

广告位

2,4-dimethylpentane structural formula

Structural formula

Business number 02WB
Molecular formula C7H16
Molecular weight 100.20
label

diisopropylmethane,

Isopropyl isobutane

Numbering system

CAS number:108-08-7

MDL number:MFCD00008945

EINECS number:203-548-0

RTECS number:None

BRN number:1696855

PubChem number:24865713

Physical property data

1. Properties: colorless liquid[1]

2. Melting point (℃): -123.4[2]

3. Boiling point (℃): 80.5[3]

4. Relative density (water=1): 0.673[ 4]

5. Relative vapor density (air=1): 3.48[5]

6. Saturated vapor pressure (kPa) :22.7 (37.7℃)[6]

7. Heat of combustion (kJ/mol): -4802.4[7]

8. Critical temperature (℃): 247.1[8]

9. Critical pressure (MPa): 2.78[9]

10. Octanol/water partition coefficient: 3.63[10]

11. Flash point (℃): -12.22[11]

12. Ignition temperature (℃): 335[12]

13. Explosion upper limit (%): 7.0[13]

14. Lower explosion limit (%): 1.0[14]

15. Solubility: insoluble in water, soluble in ethanol, Ether, benzene. [15]

16. Solubility parameter (J·cm-3)0.5:14.358

17. Eccentricity factor: 0.302

18. Critical compression factor: 0.265

19. Critical volume (cm3·mol– 1): 418

20. Critical density (g·cm-3): 0.240

21. van der Waals area (cm 2·mol-1): 1.097×1010

22. van der Waals volume (cm 3·mol-1): 78.470

23. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -4839.51

24. Gas phase standard claimed heat (enthalpy) (kJ·mol-1): -201.71

25. Gas phase standard entropy (J· mol-1·K-1): 397.02

26. Gas phase standard formation free energy (kJ·mol-1): 3.5

27. Gas phase standard hot melt (J·mol-1·K-1): 170.75

28. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -4806.62

29. Liquid phase standard claimed heat (enthalpy) (kJ·mol-1): -234.60

30. Liquid phase standard entropy (J·mol-1·K-1) : 303.17

31. Liquid phase standard free energy of formation (kJ·mol-1): -1.63

32. Liquid phase standard hot melt (J ·mol-1·K-1): 224.22

Toxicological data

1. Acute toxicity No data available

2. Irritation No data available

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradability No information available

4. Other harmful effects[16] This substance is harmful to the environment and should be treated with special Pay attention to the surfacePollution of water, soil, atmosphere and drinking water.

Molecular structure data

1. Molar refractive index: 34.39

2. Molar volume (cm3/mol): 144.8

3. Isotonic specific volume (90.2K ): 305.4

4. Surface tension (dyne/cm): 19.7

5. Polarizability (10-24cm3): 13.63

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 3.4

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 7

8. Surface charge: 0

9. Complexity: 29.3

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[17] Stability

2. Incompatible substances[18] Strong oxidants, strong acids, strong bases, halogens

3. Polymerization hazards[19] No polymerization

Storage method

Storage Precautions[20] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 37°C. Keep container tightly sealed. They should be stored separately from oxidants, acids, and halogens, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

None

Purpose

1. Used in organic synthesis, mainly used to synthesize vinylon, and also used in the adhesive and coating industries. Used in resin fiber synthesis, and also used as an intermediate and adhesive for oil pour-reducing thickeners.

2. Used in organic synthesis. [21]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/92074

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search