Epoxy curing agent Knowledge 3-Hydroxypyridine 3-Pyridinol

3-Hydroxypyridine 3-Pyridinol

广告位

3-hydroxypyridine structural formula

Structural formula

Business number 02YF
Molecular formula C5H5NO
Molecular weight 95.10
label

3-pyridinol,

3-pyridone,

azabenzone,

3-Oxopyridine,

3-Pyridylalcohol,

beta-Hydroxypyridine,

m-Hydroxypyridine,

Hydroxypyridine(3-),

B-Pyridone,

Aurora Ka-3075,

2(1h)-Pyridone

Numbering system

CAS number:109-00-2

MDL number:MFCD00006378

EINECS number:205-520-3

RTECS number:UV1144050

BRN number:105699

PubChem number:24895705

Physical property data

1. Properties: colorless needle-like crystals.

2. Density (g/mL, 20℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 129

5. Boiling point (ºC, normal pressure): 280-281

6. Boiling point (ºC, kPa): Undetermined

p>

7. Refractive index (D20): Undetermined

8. Flash point (ºC): 173

9. Specific rotation (ºC): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, 20ºC ): Undetermined

12. Saturated vapor pressure (kPa, ℃): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined Determined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Soluble in alcohol and water, slightly soluble in ether and benzene.

Toxicological data

1. Acute toxicity: mice intraperitoneal LD50: 1822mg/kg; mammals LD50: 900mg/kg; wild birds oral LD50: 750mg/kg;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 26.22

2. Molar volume (cm3/mol): 81.0

3. Isotonic specific volume (90.2K ): 216.4

4. Surface tension (dyne/cm): 50.7

5. Polarizability (10-24cm3): 10.39

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: 3

6. Topological molecule polar surface area 33.1

7. Number of heavy atoms: 7

8. Surface charge: 0

9. Complexity: 56

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

When encountering ferric chloride, it forms a red solution and is easily decomposed in the air. Avoid contact with oxides.

Storage method

Stored in a cool, ventilated warehouse. Keep away from fire and heat sources. Keep container tightly sealed. should be kept away from oxidizer, do not store together. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

It is obtained by sulfonation, alkali fusion and neutralization of pyridine. Add fuming sulfuric acid into a dry reaction pot, add pyridine dropwise with stirring, and then add mercury sulfate. Heat to 230-240℃ and keep warm for 13-14h. Cool to 20-25°C, add ethanol, continue to cool to below 5°C, and crystallize. Filter to obtain pyridine-3-sulfonic acid. The melting point is 345°C and the yield is 62%. Add sodium hydroxide and pyridine-3-sulfonic acid into the reaction pot, melt at 160°C, raise the temperature to 220-230°C and keep it warm for 4 hours. Cool to 100°C, add water to dissolve, adjust pH to 4 with 30% hydrochloric acid, concentrate under reduced pressure, and filter to remove sodium chloride. Adjust the pH of the filtrate to 8-9 with saturated sodium carbonate, cool, filter, and dry to obtain crude 3-hydroxypyridine with a yield of 64%. Recrystallize from toluene to obtain a fine product with a melting point of 126-128°C, a content of 98%, and a purification yield of 80%.

Purpose

Used in organic synthesis, medicine and dye preparation

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/92754

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search