Epoxy curing agent Knowledge Allylthiourea Allylthiourea

Allylthiourea Allylthiourea

广告位

allylthiourea structural formula

Structural formula

Business number 02Z7
Molecular formula C4H8N2S
Molecular weight 116.18
label

propylene thiourea,

thioglucosamine,

Allylthiourea,

1-allyl-2-thiourea,

N-allylthiourea,

propylene urea,

Sulforaphane oil,

Alithiourea,

Propenylthiourea,

N-Allylthiourea,

N-(2-Propenyl)thiourea,

Thiosinamine,

Rhodalline,

Labotest-bb lt00025093,

1-Allyl-2-thiourea,

Aminosin,

additive,

preservative

Numbering system

CAS number:109-57-9

MDL number:MFCD00004940

EINECS number:203-683-5

RTECS number:YR8050000

BRN number:1071470

PubChem number:24845795

Physical property data

1. Properties: white crystal. Slightly smell of garlic.

2. Density (g/mL, 25/4℃): 1.22

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 76-78.05

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 5.2kPa): Undetermined Determined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturation Vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (% , V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Soluble in water and ethanol, slightly soluble in Ether, insoluble in benzene.

Toxicological data

1. Acute toxicity: rat oral LD50: 200mg/kg; rat intraperitoneal LD50: 500mg/kg; rat subcutaneous LDLo: 50mg/kg; mouse intraperitoneal LC50: 1858mg/kg; dog Intravenous LDLo: 110mg/kg;

2. Mutagenicity

Mutation of microbial Salmonella typhimurium: 150μg/plate;

Ecological data

1. Other toxic effects: This substance is slightly harmful to water.

Molecular structure data

5. Molecular property data:

1. Molar refractive index: 34.72

2. Molar volume (cm3/mol): 107.1

3. Isotonic specific volume (90.2K): 283.8

4. Surface tension (dyne/cm): 49.2

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 13.76

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 0.2

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: 3

6. Topological molecule polar surface area 70.1

7. Number of heavy atoms: 7

8. Surface charge: 0

9. Complexity: 79.8

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with chlorine, a strong oxidizing agent.

2.Burning produces toxic nitrogen oxide and sulfur oxide smoke.

3. Toxic when taken orally. It is irritating to the eyes, respiratory system and skin. Wear appropriate protective clothing when using in large quantities.

Storage method

1. Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Keep container tightly sealed.

2. They should be stored separately from oxidants and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. From the reaction of allyl chloride and sodium thiocyanide, first heat and dissolve the sodium thiocyanide, add a small amount of potassium iodide after cooling, then add allyl chloride and ethanol, reflux for 16 hours, cool and separate the oil layer and wash it with water 3-4 times Allyl isothiocyanate is obtained, dried with anhydrous calcium chloride, distilled, and the fraction with a boiling point of 140-155°C is collected to obtain “ester”. Then add it to ammonia water and heat to about 80°C with stirring, a violent reaction occurs, cool to precipitate crystals, filter, and dry to obtain crude product, which is then recrystallized from ethanol to obtain the finished product.

Purpose

1. Determination of cadmium and uranium. Corrosion inhibitors. Organic Synthesis.

2.This product can be used as a cyanide-free copper plating additive to increase the brightness and corrosion resistance of the plated product. It can also be used as a preservative.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/93071

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search