Epoxy curing agent Knowledge sodium formate

sodium formate

广告位

Sodium formate structural formula

Structural formula

Business number 03U2
Molecular formula CHNaO2
Molecular weight 68.01
label

Sodium formate dihydrate,

Formic acid sodium salt,

sodium formate,

Sodium formate dihydrate,

Sodium fulminate,

Sodium formate dihydrate,

Sodium formate dihydrate,

Formic acid sodium salt,

preservative,

antiseptic pesticides,

food additives

Numbering system

CAS number:141-53-7

MDL number:MFCD00013101

EINECS number:205-488-0

RTECS number:LR0350000

BRN number:3595134

PubChem number:24886222

Physical property data

1. Physical property data:

1. Properties: white granular or crystalline powder. It is hygroscopic and has a slight formic acid smell.

2. Density (g/mL, 25/4℃): 1.92

3. Melting point (℃): 253

4. Boiling point (ºC, Normal pressure): 360 ºC

5. Solubility: Soluble in water and glycerol, slightly soluble in ethanol, insoluble in ether.

Toxicological data

2. Toxicological data:

1. Acute toxicity: Mouse oral LC50: 11200 mg/kg;

Mouse intravenous LC50: 807 mg/kg;

Mouse not reported LC50: 2500 mg/kg;

Rabbit intravenous LDLo: 1250 mg/kg.

Ecological data

3. Ecological data:

1. Other harmful effects: This substance may be harmful to the environment, and special attention should be paid to water bodies.

Molecular structure data

None yet

Compute chemical data

IV. Calculated chemical data:

1. Number of hydrogen bond donors: 0

2. Number of hydrogen bond acceptors: 2

3. Number of rotatable chemical bonds: 0

4. Topological molecular polar surface area (TPSA): 40.1

5. Number of heavy atoms: 4

6. Surface charge : 0

7. Complexity: 13.5

8. Number of isotope atoms: 0

9. Determine the number of atomic stereocenters: 0

10. The number of uncertain atomic stereocenters: 0

11. The number of determined chemical bond stereocenters: 0

12. The number of uncertain chemical bond stereocenters: 0

13. Number of covalent bond units: 2

Properties and stability

1. Stable under normal temperature and pressure.

Incompatible materials: strong oxidants.

The aqueous solution is neutral, with a pH value of approximately 7

2.This product is toxic. For protection methods, see formic acid. Generally, intermediates are used for their own use.

Storage method

1. Store in a sealed and dry container. It can be packed in plastic bags lined with plastic bags or woven bags coated. Storage and transportation in accordance with general chemical regulations.

Synthesis method

1. Industrially, it is obtained by reacting carbon monoxide and sodium hydroxide at 150-170℃ and about 2MPa. In fact, the production process of sodium formate is part of the production of oxalic acid, and the concentration of sodium hydroxide solution used for the absorption reaction is 25%-30%. Sodium formate can also be prepared by reacting formic acid with sodium oxyoxide or sodium bicarbonate. Raw material consumption quota: carbon monoxide (>28%) 1630kg/t, caustic soda (>30%) 2160kg/t.

2. Pentaerythritol by-product.

3. It is formed by the reaction of carbon monoxide and sodium hydroxide at 160℃ and 2MPa.

4.Produced by the reaction of carbon monoxide and sodium hydroxide. Or it can be obtained by reacting formic acid with sodium hydroxide or sodium bicarbonate.

5. React with sodium bicarbonate solution and formic acid, remove impurities, concentrate and crystallize, and then wash with ethanol to obtain:

span>

Purpose

1. Mainly used to produce formic acid, oxalic acid and insurance powder.

2. Used as reagent, disinfectant and mordant for determination of phosphorus and arsenic.

3. Preservatives. Has diuretic effect. EEC countries are allowed to use it, but the UK is not allowed to use it.

4. It is an intermediate in the production of formic acid and oxalic acid, and is also used in the production of dimethylformamide, etc. Also used in medicine, printing and dyeing industries. It is also a precipitant for heavy metals.

5. Used in alkyd resin coatings, plasticizers, high explosives, acid-resistant materials, aviation lubricants, and adhesive additives.

6.Heavy metal precipitant can form trivalent metal complex ions in solution. Reagents for the determination of phosphorus and arsenic. Also used as a disinfectant, astringent, and mordant. It is also an intermediate in the production of formic acid and oxalic acid, and is used in the production of dimethylformamide, etc.

7.Used for nickel-cobalt alloy electrolyte plating.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/93532

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search