Epoxy curing agent Knowledge L-Ascorbyl Palmitate

L-Ascorbyl Palmitate

广告位

L-Ascorbyl Palmitate Structural Formula

Structural formula

Business number 03RQ
Molecular formula C22H38O7
Molecular weight 414.53
label

L-Ascorbyl Palmitate,

6-O-Palmitoyl-L-ascorbic acid, L-Ascorbyl palmitate, Ascorbic acid 6-palmitate,

Antioxidants,

food additives,

vitamins,

Nutrition supplements

Numbering system

CAS number:137-66-6

MDL number:MFCD00005377

EINECS number:205-305-4

RTECS number:CI7671040

BRN number:96552

PubChem number:24857513

Physical property data

1. Properties: white or slightly yellow powder with a slight citrus smell. Sensitive to light.

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 113

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 5.2kPa): Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): [a] 20/D+22.9°(c=2, in methanol).

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturation Vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (% , V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: 1g dissolves in about 4.5ml ethanol, extremely Slightly soluble in water and vegetable oil.

Toxicological data

Acute toxicity data: Mouse oral LD50: 25mg/kg

Ecological data

None

Molecular structure data

1. Molar refractive index: 109.62

2. Molar volume (cm3/mol): 360.2

3. Isotonic specific volume (90.2K): 959.9

4. Surface tension (3.0 dyne/cm): 50.4

5. Polarizability (0.5 10-24cm3): 43.45

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): 6.1

2. Number of hydrogen bond donors: 3

3. Number of hydrogen bond acceptors: 7

4.  Number of rotatable chemical bonds: 18

5, Number of tautomers: 8

6, Topological molecular polar surface area (TPSA): 113

7. Number of heavy atoms: 29

8. Surface charge: 0

9. Complexity: 515

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 2

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None

Storage method

Sealed packaging. Store in a cool, dry warehouse away from high temperatures, light and oxidation. Do not store together with poisonous or polluting chemicals.

Synthesis method

1. Place 64g of palmitic acid in a heated dropping funnel to keep it in a molten state; add 200mI. Put thionyl chloride into a flask, heat it so that its vapor enters the reaction column equipped with porcelain ring packing through the conduit, and reacts with the palmitic acid dripped from the upper part of the column. The unreacted thionyl chloride condenses through the branch pipe at the upper part of the reaction column. Then return to the flask; after the palmitic acid is added dropwise, react for 30 minutes, remove a small amount of thionyl chloride by distillation under normal pressure, and collect 58.6g of colorless transparent liquid at 150~152°C (2~3kPa) under reduced pressure distillation, with a yield of 86% ( Calculated as palmitic acid).
2. Add 26.5mL to the flask. Dimethylformamide, add 2g of HCl gas at 0°C, then add 9.69g of crystallized ascorbic acid and 13.3mL. Dichloromethane, the reaction solution is clear at this time; slowly drop 15.2 mL of palmitoyl chloride at 0°C. After the dropwise addition is completed, react for 18 hours, then raise the temperature to 20°C and react for 30 minutes. Add the reactants to 100 mL. Ethyl acetate and 200 mL. Stir and wash in water for 2 hours, filter with suction, wash with water (50 mL×3) three times, and dry under vacuum at 50°C for 18 hours to obtain 17.5 g of white powder with a yield of 84.3%.

3.Chlorination of palmitic acid produces palmitoyl chloride, which is then esterified with ascorbic acid, filtered and dried to obtain ascorbyl palmityl ester.

Purpose

1. It has antioxidant and antioxidant synergistic properties and can be used as an antioxidant or synergist. 0.01% L-ascorbyl palmitate can extend the shelf life of most vegetable oils. Adding 0.01% to soybean oil has a better antioxidant effect than 0.02% of BHA and BHT. It has strong ability to protect fried food oil and fried food, preventing color and volatile odor caused by frying.

2.As an antioxidant. It is widely used for antioxidant preservation of various foods and beverages such as oils, dairy products, cosmetics, health products, baby food, aquatic products, puffed foods, fried foods, meat products, nuts, fruits, etc. For oil-containing foods, instant noodles, and hydrogenated vegetable oil, the maximum usage amount is 0.2g/kg; for infant formula foods, the maximum usage amount is 0.01g/kg (calculated as ascorbic acid in oil and fat).

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/96189

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search